To Next Page
C
Christopher IbarraAug 5, 2025
What to do if water drips from the P&T safety valve in my MDC caravan?
- DDiana SchneiderAug 6, 2025
If water is dripping from the P&T safety valve, the water pressure may be too high, or there might be lime or dirt under the valve seat. Check the water pressure, ensuring it doesn't exceed 400 kPa; use a pressure reducer when connected to a central water supply. After the appliance cools, slowly raise the test lever to flush the water system and dislodge any foreign matter from the P&T safety valve seat. If the issue persists, the P&T safety valve may need replacement by a certified service technician.
General
