38
500KM FIRST SERVICE
CHECKED
Hitch Check hitch bolts to 76Nm. Lubricate with high temp bearing grease
Handbrake Inspect and adjust handbrake
Brakes Inspect and adjust brakes
Wheel nuts
Inspect condition and torque to 125Nm (12mm studs)
(140Nm 14mm studs alloy rims) (200Nm 14mm studs steel rims)
Tyres Inspect for abnormal wear, damage and pressure
General fixings Ensure no loose fittings
Date: Service Person:
Dealer Stamp:
6 MONTHS / 5,000KM SERVICE
CHECKED
Hitch Check hitch bolts to 76Nm
Handbrake Check cable and adjust if necessary
Hand winch Check brake function and webbing
Suspension Lubricate and check bushes for excess movement. Torque bolts to 190Nm
Brakes Inspect and adjust. Check lining thickness and drum wear
Wheel bearings Remove, clean and re-lubricate. Inspect for wear and replace if necessary
Wheel Nuts
Inspect condition and torque to 125Nm (12mm studs)
(140Nm 14mm studs alloy rims), (200Nm 14mm studs steel rims)
Tyres Inspect for abnormal wear, damage and pressure
Lights Check all lights are functioning
Battery Check terminals and voltage at full charge
Seals Check condition and correct latch/lock adjustment for correct 30-50% compression
General fixings Check all structural fixing are secure.
Date: Service Person:
Dealer Stamp:
To Next Page
Loading...
