MDC XT12 - ABOUT YOUR HYBRID OFFROAD CARAVAN; Specifications; Bearings and Seals

6
1300 4X4 4X4
ABOUT YOUR HYBRID OFFROAD CARAVAN
Specifications
Specifications apply to:
2017-18 Model Only
Berth
2
Trailer Length
5500mm (hitch to tailgate)
GTM
2800kg
Chassis Construction
150mm x 50mm x 4mm (galvanised)
Body Construction
Aluminium Composite Panel, Fully Welded Frame +
Chassis
Suspension
Fully Independent Trailing Arm Suspension with 4 Shock
Absorbers
Wheels & Tyres
2 x 16” Rims + 1 spare, Goodride Mud Terrain 265/75
R16
Hitch
3500kg Vehicle Components
Brakes
12” Electric Off Road with Hand Brake
Stone Guard
Included with Stone Tamer Mudflaps
Gas Cylinders
2 x 9kg Gas Cylinder Holders incl 2 Gas Cylinders
Jerry Can Holder
2 x 20L Jerry Can Holders
Cooktop
SMEV 3 Burner Hob Deluxe Cooker
Kitchen Construct
External 304 Grade Stainless Steel
Water Tank
2 x 80L Fresh Water
Water Delivery
12v Electric Pump x 1
Hot Water System
Truma “Boiler” 14 Litre Gas
Shower (Ensuite)
Hot/Cold Internal Ensuite with External Van Side
Mounted Shower Tent
Battery
2 x 100AH Deep Cycle AGM Batteries
Awning
Electric
AC Charger (240v)
Projecta IDC3500-12v 35A 7 Stage
DC Charger (12v)
Projecta IDC25-9-32v 25A 3 stage
Inverter
Projecta IM1000-12v 1000w Continuous/2000w Peak
Bearings and Seals
Bearings are a consumable item should be removed, inspected and repacked with grease every 5,000km and
replaced every 10,000km as best practice. See maintenance schedule for guidance.
Bearing Number: Inner Bearing 25590
Cone: 25520
Outer Bearing 25590
Cone: 25520
Seal: 55 x 85 x 12
Fridge Fitting Chart