Need help?Do you have a question about the MDL POWERUP A80 and is the answer not in the manual?
Details machine model, serial number, purchase date, dealer, and contact info for assistance.
Explains noise levels and recommends ear protection based on usage and cab conditions.
Defines DANGER, WARNING, and CAUTION signal words used for hazard communication in the manual.
Outlines operator responsibilities, potential dangers, and mandatory pre-use checks for safe operation.
Details checks for operator understanding, guards, flails, hydraulics, tractor specs, work area, and safe speed.
Lists situations where the machine should not be used and emphasizes safe practices like disengaging the machine.
Details specific actions to avoid during operation, such as improper maintenance or involving children.
Guides initial attachment, bracket fitting, and securing the machine to the tractor.
Details connecting draft links, PTO shaft, and setting up machine controls for operation.
Outlines post-attachment checks for hoses and movements, and steps to fold the machine for transport.
Covers machine storage procedures and checking hydraulic oil levels and identifying oxidation.
Discusses checking hose condition, repairing minor damage, and the procedure for replacing hydraulic hoses safely.
Details how to connect draft links and fit the stabiliser nose for linkage-mounted machines.
Covers fitting the top link, securing the stabiliser pin, and setting tractor linkage for proper operation.
Details measuring and cutting the PTO shaft, fitting it, and attaching torque chains.
Covers connecting hydraulic hoses, fitting control units, and checking machine movements.
Details attaching the flail head, connecting hoses, and making final adjustments for horizontal alignment.
Provides critical safety warnings and a strict sequence for safely removing the machine from the tractor.
Covers machine storage and steps for subsequent attachment to the same or a different tractor.
Emphasizes the operator guard and practicing machine controls without the rotor engaged.
Identifies and explains the symbols for machine controls (Angle, Lift, Reach, Slew, Rotor) and their arrangement.
Explains the machine's breakaway function, potential causes, and the 'AUTO RESET' vs. 'SLEW' modes.
Details the sequence of operations to safely move and secure the machine into its transport configuration.
Specifies alignment, clearance, and safety precautions for transporting the machine.
Provides specific instructions for engaging the PTO and rotor to start operation.
Details correct rotor operating speeds and tractor forward speeds based on material and cutting performance.
Warns about high voltage cables, specifying a minimum clearance and advising consultation with power companies.
Outlines the recommended sequence for cutting hedges, starting with field side and finishing with the top cut.
Warns against cutting on the blind side and details safety measures for working on adverse slopes.
Details daily lubrication points and maintenance for the PTO shaft, including guard checks.
Lists various machine components, their article numbers, part numbers, and quantities across different assemblies.
Outlines the product warranty terms, coverage periods, exclusions, and procedures for making a claim.
Provides company contact information and notes the warranty start date.
General| Brand | MDL POWERUP |
|---|---|
| Model | A80 |
| Category | Trimmer |
| Language | English |
To Next Page