Increase fan speed: Press the + fan speed button to increase the fan speed between 1 and
12. When 12 is reached, pressing this button again will take you back to 1.
Decrease fan speed: Press the - fan speed button to decrease the fan speed between 1
and 12. When 1 is reached, pressing this button again will take you back to 12.
Vertical oscillation: There are 3 angles of vertical oscillation. Press the vertical oscillation
button to move through narrow (1), medium (2) and wide (3) oscillation. Once selected, the
display will revert back to displaying the room temperature. To turn o vertical oscillation,
press the vertical oscillation button until 0 appears on the display. The moment 0 is reached,
the fan will remain in that angled position.
Pause: Press the button to pause oscillation at any point during oscillation modes 1, 2 or 3,
and press again to resume oscillation at any time.
Horizontal oscillation: There are 3 angles of horizontal oscillation. Press the horizontal
oscillation button to move through narrow (1), medium (2) and wide (3) oscillation. Once
selected, the display will revert back to displaying the room temperature. To turn o
horizontal oscillation, press the horizontal oscillation button until 0 appears on the display.
After a setting is adjusted, the interface will revert back to displaying the room temperature and the set
mode (unless in Night mode where the interface will turn o).
Oscillation type Display
Degree of vertical
oscillation
Degree of horizontal
oscillation
Narrow
1 20° 30°
Medium
2 30° 75°
Wide
3 65° 120°
[EN] 8
To Next Page
Loading...
