21
Delay Start
Want to get your ingredients in the MultiPot but start cooking later? Use Delay Start.
Complete the following steps to run Delay Start:
1. Place the steel pot inside the base and plug in your MultiPot. The LCD screen will
display OFF.
2. Place your prepared ingredients into the pot.
CAUTION
Never place ingredients directly into MultiPot base; always ensure inner steel pot
is in place. Placing ingredients directly into the base can cause damage, injury, and
will void your warranty.
3. Lock lid in place, select your program, pressure level, and release style.
4. Press Delay Start. Use the +/- buttons to set the number of hours you wish to delay
start. Press Delay Start again to set the number of minutes.
5. After 10 seconds the MultiPot will beep 3 times and the Delay Start timer will begin.
After the timer is through, the MultiPot will automatically switch to your selected
program.
CAUTION
Do not use Delay Start for foamy or thick foods (such as porridge or oatmeal).
Always monitor cooking progress when working with foamy or thick foods.
To Next Page
Loading...
