Mebay DC4 D MK3 Series - Controller Parameters

DC4xD MK3 GENSET CONTROLLER USER MANUAL
7
 Under speed
 Low oil pressure
 High water temperature
 High Oil temperature
 High Cylinder Temperature
 High Tank temperature
 Low fuel level
 Low oil level
 External instant unloading shutdown
 External emergency alarm
 RPM Lost
 Sensor Open
 Over Frequency
 Under Frequency
 Over voltage
 Under voltage
 Over current
 Non-balance of current
 Over power
 Maintenance expire
 Low water level alarm
 Emergency Stop
 Crank failure
 Battery over voltage
 Battery under voltage
 The charger fails to charge
 Charger charging failure
 Stop Failure
5.Parameters
Options
Parameters
Working voltage
DC8V---36V Continuous
Power consumption
Standby：24V：MAX 1W
Working：24V：MAX 5W
AC Voltage Input
1P2W 30VAC-300VAC (ph-N)
2P3W 30VAC-300VAC (ph-N)
3P4W 30VAC-300VAC (ph-N)
Rotate speed sensor
Frequency
50-9000Hz
MAX Accumulating Time
99999.9Hours（Min Store time:6min）
Fuel Relay Output
Max 5Amp DC+VE Supply voltage
Start Relay Output
Max 5Amp DC+VE Supply voltage
AUX. OUTPUT1
Max 5Amp DC+VE Supply voltage
AUX. OUTPUT2
5AMP Non-contact normal open&normal close output
AUX. OUTPUT3
5AMP Non-contact normal open output