Mebay DC5 D MK3 Series

Need help?

Do you have a question about the Mebay DC5 D MK3 Series and is the answer not in the manual?

Summary

Panel and Display

DC50 D MK3 Panel and Display

Details the panel layout, buttons, and display elements for the DC50D MK3 controller.

DC52 D MK3 Panel and Display

Details the panel layout, buttons, and display elements for the DC52D MK3 controller.

Control and Operation Instruction

Manual Test Mode

Describes the specific procedure for manual testing of the genset with the DC52D MK3.

Manual Start Mode

Explains the step-by-step process for starting the generator set manually.

Automatic Starting Mode

Details the sequence and conditions for the automatic startup of the generator set.

Warnings and Shutdown Alarms

Warnings

Describes non-critical alerts that remind operators of conditions requiring attention without stopping the genset.

Shutdown Alarms

Details critical alarms that cause the generator set to stop and lock immediately.

Parameters Setting

Enter the edition page

Instructions on how to access the parameter editing interface and enter the password.

Revert back to default

Procedure to restore all configurable parameters to their factory default settings.

Basic Setting

Configuration of fundamental parameters like language, genset system, and CT rate.

Basic Setting 2

Configuration of sensor types, units, and other basic operational parameters.

Delay time setting

Configuration of various time delays for engine start, stop, protection, and alarm functions.

Engine Alarm setting

Setting thresholds and actions for engine-specific alarm conditions like speed and oil pressure.

Generator alarm parameters

Configuration of parameters related to generator output alarms such as frequency, voltage, and current.

Output; Input setting

Configuration of auxiliary outputs and inputs for various control and monitoring functions.

Working plan and maintenance setting

Setting up automatic working schedules, maintenance dates, and running times.

Mains protection

Configuration of parameters for monitoring and protecting against mains voltage deviations.

LCD setting

Settings for display contrast, screen timeout, and home page reversion.

USB;RS485 PORT

Configuration parameters for communication interfaces, including controller address and baud rate.

Working plan

Details the setup for automated working schedules based on remote start or mains failure conditions.