Mebay DC5 D MK3 Series User Manual

DC5xD MK3 GENSET CONTROLLER USER MANUAL
39
19.Soundproof alarm: audio alarm output is
disabled if there is signal output.
20.Front face button disabled: any button
except for page button is disabled if there is
signal output.
21.Meter mode: all output are disabled, alarm
and warns are invalid. any button except
for page button is disabled.
22.Remote control mode: any button except
for page button is disabled if the input is
valid, LCD will display remote mode.remote
control module can start/stop and monitor
parameters through front face buttons.
23.– 40. Reserved.
10
AUX. INPUT 1
valid
0- Normal close
1- Normal open
The status of switch value input valid.
11
AUX. INPUT 2
valid
0- Normal close
1- Normal open
12
AUX. INPUT 3
valid
0- Normal close
1- Normal open
13
AUX. INPUT 4
valid
0- Normal close
1- Normal open
14
AUX. INPUT 5
valid
0- Normal close
1- Normal open
7) Working plan and maintenance setting
NO
Parameter
Range(defaults)
Notes
1
Working plan format
Disable
Every month
Every week
This mode must be under auto
mode.Working plan is disabled once setting
as disable.The working plan will be executed
according the chosen date when setting as
every month.The working plan will be
executed according the chosen date when
setting as every week.
2
Maintenance date per
month
From 1
st
to 31
st
Default: the first
day
The date chosen for every month.
3
Maintenance date per
week
Monday to
Sunday
Default: Sunday
The date chosen for every week.
4
Maintenance with load
or not
Disabled/with
load
To choose if the genset starts with load or
not.
5
Maintenance start time
00:00-
23:59(00:00)
Maintenance start time setting.
6
Maintenance running
time
1-120m(5m)
Maintenance running time setting.
8)Mains protection
No
Parameter
Range(defaults)
Notes
1
Phase
Disable
1 Phase 2 Wire
2 Phase 3 Wire
Choose the input, there is no display if setting as
disable.

Mebay DC5 D MK3 Series Specifications

General

Brand	Mebay
Model	DC5 D MK3 Series
Category	Controller
Language	English