Mecc Alte DSR - User Manual

Guida Tecnica:
Regolatore Digitale DSR
Technical Guide:
DSR Digital Regulator
E309573

Summary

INTRODUCTION

1. Architecture of the system

2. Technical Characteristics

Details the key technical specifications of the DSR regulator, including voltage, frequency, and precision.

INSTALLATION AND CONNECTIONS

2. Connections

5. Setting up the regulator

SERIAL COMMUNICATIONS AND INPUTS

6. Serial communications

PARAMETERS AND OPERATING DATA

1. ModBus Registry List

Lists parameters, their ranges, defaults, and notes for ModBus communication.

2. Configuration word (Parameter P[10])

Details how to configure the regulator by setting individual bits in parameter P[10].

SETTING VOLTAGE, STABILITY, AMP AND HZ PARAMETERS

1.1 Setting voltage

Details methods for setting the regulator's output voltage using trimmers and parameters.

1.2 Soft Start

2. Stability

EXCITATION OVERCURRENT

3.1 Description

Explains the excitation winding temperature estimator and overcurrent protection.

3.2 Calibration with a supervising unit

UNDERSPEED PROTECTION

4.1 Description

Details how voltage regulation changes with frequency below a threshold.

4.2 Calibration with a supervision unit

OVERSPEED AND OTHER PARAMETERS

5. Overspeed

Sets the overspeed alarm intervention threshold and related parameters.

REGULATOR ALARMS CONTROL

1. Table of recapitulation

APO OUTPUT AND OPERATION TIME

3. APO Output

Details the Active Protection Output (APO) function and its alarm selections.

DI1 COMMUNICATIONS UNIT

Description

PROGRAMMING SOFTWARE AND MONITORING

APPENDIX A: DSR_Reader MONITORING SOFTWARE

1. Installation

APPENDIX B: DSR SET UP ON A TEST BENCH

Mecc Alte DSR Specifications

General

Brand	Mecc Alte
Model	DSR
Category	Controller
Language	English