Mecer Xpression W950AU - Component Removal Guides

Disassembly
Removing the Battery 2 - 5
2.Disassembly
Removing the Battery
1. Turn off the computer, turn it over.
2. Slide the latch in the direction of the arrow (Figure 1a
).
3. Slide the latch in the direction of the arrow, and hold it in place (Figure 1a
).
4. Slide the battery in the direction of the arrow (Figure 1b
).
1
2
6
3
4

3. Battery
Figure 1
Battery Removal
a. Remove screws from the
bottom case.
b. Separate the top and bot-
tom case.
c. The battery wil be visible.
a.
b.
3
4
2
1