3
www. mechmaxx.com
SAFETY SIGNS
The rating plate on your machine may show symbols. These represent important information about the product or instruc-
tions on its use.
SAFETY SIGNS
FUEL HERE.
RISK OF FIRE. ALLOW
ENGINE TO COOL FOR 1
MINUTE BEFORE
REFUEL LING.
USE UNLEADED PETROL.
UN1203
DO NOT place wood or branches
over 6 in in diameter into the
in-feeding bin. The blades may get
stuck or jammed.
MAX. 6inch
WARNING:EMERGENCY STOP
Check belt tension before
operating chipper. Belt
deflection should be less
than 3/8’’ when 10lb of
pressure is applied to the
belt. The belt will loosen
after the first 1-2 hours
use. You must re-check
and adjust accordingly or
the belts will begin to slip
and wear. For best
performance check for
proper belt tension every
20 hours of use.
10 lb.
MAX
3/8’’
To Next Page
Loading...