MechMaxx P4206 - Maintaining Your Machine

7
www. mechmaxx.com
SAFETY
This machine has two rotating cutting knives capable of
amputating hands and feet and throwing objects.Keep
hands and feet out of openings while machine is running.
Failure to observe these safety instructions could result
in serious injury or death.
Avoid contact with hot fuel, oil, exhaust fumes and hot
surfaces.Do not touch the engine or muffler.These parts
get extremely hot from operation. They remain hot for a
short time after you turn off the unit.Allow the engine to
cool before doing maintenance or making adjustments.
If the machine should start to make an unusual noise or
vibration,immediately shut off the engine, disconnect the
spark plug wire,and check for the cause.Unusual noise or
vibration is generally a warning of trouble.
Keep the engine and muffler free of grass, leaves,exces-
sive grease or carbon build up to reduce the chance of a
fire hazard.
Never douse or squirt the unit with water or any other
liquid.Keep handles dry,clean and free from debris. Clean
after each use.
When storing machine out of the reach of children and do
not allow persons unfamiliar with the machine or these
instructions to operate it. This machine can be dangerous
when used by an untrained user.
Some parts of this machine are made of plastic or rubber
and should be kept away from chemicals.
Do not alter or adjust any part of the chipper shredder or
its engine that is sealed by the manufacturer or distribu-
tor. Only a qualified service technician may adjust parts
that increase or decrease governed engine speed.
To maintain your machine,check for any misalignment or
binding of any moving parts. Parts that are broken or worn
down that may affect the machine's operation.If damage
or worn parts are identify, they should be repaired before
use. Many accidents are caused by poorly maintained
equipment.
Never cover the machine while the muffler is still hot.
Observe proper disposal laws and regulations for
gas,oil,etc. to protect the environment.
Use only attachments and accessories approved by the
manufacturer. Failure to do so can result in personal
injury.
Do not put hands or feet near rotating parts.
MAINTAINING YOUR MACHINE