Mecmesin Tornado - RS232 Communication and Configuration; RS232 Command Reference

page 30
It may be desirable to reverse the display, so that it can be
easily read with the top plate handle positioned on the
right-hand side.
To access the INVERT function, press and hold the MENU
key until page 1 of the main-menu appears. Press and
release the MENU key twice to access the main menu page
3. Using the UP and DOWN keys, move the arrow cursor
to INVERT, and press ENTER.
The display shows INVERT OFF and ON:
Use the UP and DOWN keys to move the arrow cursor
against the desired selection and press ENTER.
The display will return to the main menu page 3, press the
ESC key to return to the main display.
To restore the factory default settings of your Tornado, press
and hold the MENU key until page 1 of the main-menu
appears. Press and release the MENU key twice to access
the main menu page 3. Using the UP and DOWN keys,
move the arrow cursor to DEFAULTS, and press ENTER.
The display shows DEFAULTS SET, press the ENTER key.
The display shows RESTORE DEFAULTS YES and NO.
Align the arrow cursor with YES to restore default settings,
or with NO to cancel the action, and press the ENTER key.
The display will return to the main menu page 3, press the
ESC key to return to the main display.
INVERT
Note: The menu pages are not
inverted when the INVERT function
is enabled.
INVERT sub-menu 1
DEFAULTS
DEFAULTS sub-menu 1
DEFAULTS sub-menu 2