Med-Mizer FlexTilt TF16 - Specifications; Options and Accessories; Preparation for Use; Unpacking

FlexTilt FT16-FT24 User Manual
Revision 06
MAN-FlexTilt REV06 FlexTilt-FT20-FT24 USER MANUAL Page 5 of 13
Specifications
FT16
FT20
FT24
Seat Width
16"
20”
24”
Backrest Recline
34 Degrees
34 Degrees
28 Degrees
Seat Tilt
27 Degrees
27 Degrees
25 Degrees
Leg Raise
42 Degrees
42 Degrees
45 Degrees
Backrest Adjustability/Seat Depth
From Edge of Seat: 15.375”/16.0625”/17.125”/18”
Seat Height Adjustment
Seat to the floor: 17.5”/18.5”/19.5”
Leg support extends
From 15.5”/16.25”/17”/17.75”/18.5”/19.25”/20”
Options and Accessories
FTBUCK – Foot Box
SBFLEX – Stabilizer Bars
Preparation for Use (Read this user manual thoroughly)
Unpacking (If Shipped LTL/Commercial)
Tools Required: Utility Knife and Side Cutting Shear
1. Remove shrink wrap and straps that attach the chair to the pallet.
Operation
1. Chair Tilt – The chair tilt action on the chair is activated when you use the left lever on
the back of the chair.
Use left lever to
operate the seat
tilt action
Chair Tilt Position