Med-Mizer FlexTilt TF16 - Recline Position; Leg Elevation

FlexTilt FT16-FT24 User Manual
Revision 06
MAN-FlexTilt REV06 FlexTilt-FT20-FT24 USER MANUAL Page 6 of 13
2. Back Recline - The back recline action on the chair is activated when you use the right
lever on the back of the chair.
Note: The leg rest elevates as the caregiver reclines the chair, the leg elevation can be
adjusted once the caregiver has the chair in the desired recline position. See step 3 for
details.
3. Leg Adjustment – The leg elevation is activated by lifting on the black sleeve on the
side of the lower base frame.
Note: Place lower leg elevation to the full down position prior to attempting patient
egress from Chair.
Use right lever to
operate the
recline action
Back Recline
Black Sleeve on
either side of
the chair