MedeaWiz® Sprite
Team Kingsley LLC
28 | P a g e
Power Supply
The Sprite is one of the most energy efficient “green” video repeaters available today. Using
only 5 Volt DC power at an average of 400 mA, it takes only about 2 Watts to run.
The Sprite requires a regulated 5 Volt DC power supply, which is included. The power
connection takes a barrel plug with 1.35mm ID and 3.5mm OD, center Positive.
Use of a wrong power supply will void the warranty.
The Sprite can supply 5 Volts DC on the I/O port for your micro-controller at up to 100 mA. A
short on this supply may result in the internal fuse burning and will void the warranty.
Alternately, you can power the Sprite from your controller. You must have a 5 Volt DC regulated
supply with 500 mA available. Use 26 AWG wire or larger. The supplied A/V cable is not
suitable. Do not use the Sprite’s included power supply together with an external power supply.
To Next Page
Loading...