1
4
Note
• Use Authentic Medela Spare Parts
only. See Section 2 for details.
• Check pump kit components for
wear or damage before use and
replace if necessary.
• All components must be completely
dry before use for proper
performance and to prevent damage
to the pump.
Tip
Carry out all the steps with care and
assemble the pump kit correctly for
optimum performance.
T
22
Push the yellow valve head head and white
membrane onto the connector.
Position valve head laterally.
9. Assembly of Pump Kit
Place the protective membrane
onto a flat surface and carefully
push the membrane cap down
until it engages.
7
Wash hands thoroughly with soap and water
before touching breast pump, kit and breasts and
avoid touching the inside of containers or lids.
Caution
Parts Needed:
• Tubing
• Symphony
®
pump
• Breast shields
• Breast milk bottles
• Lids
• Connectors
• Yellow Valve Heads
• White Membranes
• Membrane cap
• Protective membrane
To Next Page
Loading...
