Questions? Visit www.medela.com or call us at 1-800-435-8316.
35
It is important to complete the entire
15 minute INITIATE program.
2 3
Press the “Let-down” button
within 10 seconds. The display text
will change to “INITIATE running”.
The INITIATE program runs
automatically for 15 minutes with
stimulation, expression and pauses
phases. An auditory signal indicates
the end of the program. The display
shows “Program complete”. The
pump will automatically turn off.
Operation: INITIATE program
INITIATE running
Set to Maximum Comfort Vacuum
TM
in both stimulation and expression
phases. Refer to Section 12.
2
If your milk starts to flow before the
end of the two minutes, press "Let-
down button to change to the
expression phase
Make sure that the milk flows
into the bottle properly.
Program complete
To Next Page