Medela ThopEasy+ - Data Transfer to PC and Open File

EN
6
3.3 Data transfer to PC and open file
By clicking on
all treatment data is downloaded from the device and saved according your settings (see chapter 3.3) or by default.
Note: After downloading the .log files, the Thopaz
+
/ Thopaz memory is erased by default.
By clicking on
you can open the existing ThopEasy
+
documents (.thp / .thpx) or log files.
ThopEasy
+
will show the following dialog.
The dialog shows all saved data (.thp / .thpx or log file).
File types
*.log Therapy data downloaded from the device.
The file name consists of the Thopaz
+
/ Thopaz serial number and the therapy ID.
(serialnumber_therapyID.log).
*.thpx Therapy data which was previously loaded and saved by ThopEasy
+
.
*.thp Therapy data which was previously loaded and saved by ThopEasy.
You can only open these existing files with ThopEasy
+
. Saving as *.thp file is not possible with ThopEasy
+
.