Beat Type
1. Repeatedly press the [FUNCTION] button to select the beat menu.
The LCD displays “Beat”.
Use the [+ ]/ [-] buttons to change the beat type.
2. Pressing [+] and [-] buttons at the same time will reset the beat type
to default “004”.
Touch
1. Repeatedly press the [FUNCTION] button to select the touch menu.
The LCD displays “Touch”.
Use the [+ ]/ [-] buttons to change the touch level.
2. Pressing [+] and [-] buttons at the same time will reset the touch level
to default “002”.
Modulation
Repeatedly press the [FUNCTION] button to select the modulation menu.
The LCD displays “Modul”.
Use the [+] / [-] buttons to switch modulation on or off.
Note:
Modulation is not available for percussive voices.
DSP
Repeatedly press the [FUNCTION] button to select the DSP menu. The
LCD displays “Dsp”.
Use the [+] / [-] buttons to switch DSP on or off.
Reverb Type
1. Repeatedly press the [FUNCTION] button to select the reverb type
menu. The LCD displays “Rev Type”.
Use the [+]/ [-] button to change the type value.
2. Pressing [+] and [-] buttons at the same time will reset the reverb type
to default “004”.
Reverb Level
1. Repeatedly press the [FUNCTION] button to select the reverb level
menu. The LCD displays “Rev Lev”.
Use the [+]/ [-] button to adjust the level over the range of 0-32.
2. Pressing [+] and [-] buttons at the same time will reset the reverb level
to default.
Function Menu
17
C
M
Y
CM
MY
CY
CMY
K
AW_M221L_Manual_G05_180327.pdf 17 18/3/27 16:00
To Next Page
Loading...
Need help?
General
