L / R
CHORD DICT.
The Registration Memory feature allows you to save virtually all panel
settings to a registration memory, and you can instantly recall them by
pressing a single button.
The instrument has 8 memory banks, and each bank has 4 memories
(M1-M4).
1. Hold down [STORE] button , then press one of the memory buttons
[M1] - [M4] to save the panel settings. The LCD will display “Mem
Stor” and the new settings will replace the previous memory data.
2. Press one of the memory buttons [M1] - [M4] to recall the panel
settings saved to that memory.
3. You can save following parameters to the memory:
Voice Parameter: voice, dual, DSP, mixer.
Accompaniment Parameter: style, tempo, and chord no/off,
accompaniment sections.
Function Parameter: touch, some parameters in the function menu.
Note:
Registration memory cannot be recalled when the One Touch Setting
function is in use. The registration memory will reset to default settings
after power off.
Selecting a Registration Bank
1. Press the [BANK] button. The LCD will display the bank number.
2. Repeatedly press the [BANK] button to select a bank over the range
of 1-8.
If you know the name of a chord but don't know how to play it, you can
use the Chord Dictionary function.
1. Press and hold the [CHORD DICT.] button for 2 seconds to enter this
mode. The LCD displays the Chord Type and Chord Notes.
2. The keys above C4 (including C4) are used to assign the Chord Type,
and the keys above C6 (including C6) are used to assign the Chord
Root. When the Chord Type and Chord Root are confirmed, the LCD
will display the Chord and the staff notation.
3. When you play the correct chord on the chord range of the keyboard,
an applause sound will be heard.
4. Press and hold the [CHORD DICT.] button for 2 seconds again to exit
this mode.
19
Register Memory
Chord Dictionary
M2M1 M3 M4BANK
BANK
C
M
Y
CM
MY
CY
CMY
K
AW_M221L_Manual_G05_180327.pdf 19 18/3/27 16:00
To Next Page
Loading...
Need help?
General
