MODEL: brio
IEC PROTECTION CLASSIFICATION: Class II
DIMENSION: 8.75” (W) x 13” (D) × 4.5” (H)
WEIGHT: 6.5 lbs
PRESSURE RANGE: 20-80 mmHg
ELECTRICAL: 100 - 240vac, 50/60Hz, 1.4 -0 .7 amps
POWER: 60 Watts
IP2X: Protected against ingress of solid objects over 12.5 mm
e.g. accidental touch by a person’s hand.
No protection against ingress of liquids.
APPLIED PART: Type BF
APPLIED STANDARDS: ANSI/AAMI ES60601-1, AAMI HA60601-1-11, CSA C22.2 No. 60601-1, CSA C22.2 No. 60601-1-11,
ISO 13485, ISO 14971, IEC 62304 IEC/EN 60601-1-2, IEC/EN61000-3-2, IEC/EN 61000-3-3, FCC CFR 47; Part15; Subpart B, ICES
001; ISSUE 4, AS/NZS CISPR 11, JIS T 0601-1-2, ABNT NBR IEC 60601-1-2
LEGAL MANUFACTURER: medi USA, LP, 6481 Franz Warner Parkway, Whitsett, NC 27377,
www.mediusa.com Made in USA
Temperature: Operating Temperature: 41°F (5°C) – 104°F (40°C); Storage Temperature: -13°F (-25°C) – 158°F (70°C)
Humidity: Operating Humidity: 15% – 93%; Storage Humidity: < 93%
Atmospheric Pressure: Operating Pressure: 70 kPa – 106 kPa; Storage Pressure: 50 kPa – 106 kPa
Disposal: The PCU should be discarded in accordance with proper electronic waste disposal regulations. There are no
disposal restrictions on the garments and they can be disposed with normal household waste.
Specifications
General Equipment Specifications
Environmental Conditions
.
.
8
Specifications
To Next Page
Loading...
