Mediacom XTREAM - Replacing Previous Cable Box Equipment; Disconnect your Previous Cable Box

Step 1: Disconnect your Previous Cable Box
1
Turn off your television and previous cable box.
2
Disconnect the power cord from the back of your previous
cable box and remove it from the power outlet.
(Your new box may have different power requirements. It is best
not to use the old power cord with the new box.)
3
Unscrew and remove the coaxial cable(s) from the
ports labeled Cable IN and To TV (if connected) from
the back of your previous cable box.
4
Set your previous cable box aside and refer to the section
titled, Return your previous cable box.
Replacing Previous
Cable Box Equipment