54
6. Preparing for fi rst use
Remove all packaging materials.
6.1. Setting up the device
NOTICE!
Risk of damage!
Risk of damage to the device due to improper
use of the device
To prevent the device from falling, only install
and operate it and its components on a sturdy,
level and vibration-free surface.
Some aggressive varnishes can corrode the
rubber feet on the device. If necessary, place
the device on a non-slip underlay.
6.1.1. Securing the transmitter to the wall
WARNING!
Risk of injury due to electric shock!
There is a risk of electric shock due to live cables
and wiring.
Install the device in a suitable location, and take
care not to hit any hidden electrical cables or
pipework when drilling.
To Next Page
Loading...