59
DE
EN
FR
NL
ES
IT
Press and hold the PAIR button on the headphones and
the PAIR button on the transmitter at the same time for
5 seconds.
During the pairing process, the operating LED flashes red
quickly and the PAIR LED flashes blue quickly. Both LEDs
light up continuously when the devices have been paired
successfully.
7. Operation
7.1. Starting and controlling playback
Start audio playback on the connected audio output
device.
Use the controls on your audio output device for all
other control options such as track selection or repeat
functions.
You will find more information on how to operate
your audio output device in its user manual.
7.2. Setting the volume
Turn the volume control dial (- Volume +) on the
headphones towards + to increase the volume or
towards - to decrease the volume.
7.3. Setting the balance
Turn the balance control dial ( ) towards R to
boost the right speaker.
Turn the balance control dial (
) towards L to
boost the left speaker.
To Next Page
Loading...