Need help?Do you have a question about the Medisafe SI PCF and is the answer not in the manual?
Provides contact information for Medisafe UK Ltd, including address, phone, fax, and email.
Advises fitting an independent monitoring system in accordance with ISO 15883-1:2009.
Form for recording installation details, crucial for warranty claims and product registration.
Details warranty registration requirements and includes a test checklist for installation validation.
Outlines essential safety warnings for operating and servicing the SI PCF, including hazards.
Details the responsibility for user training and lists essential training topics for safe machine operation.
Covers compliance with standards, product identity details, and manufacturer information.
Describes the intended use, performance, cycle record, failure reporting, and concept summary of the SI PCF.
Covers general safety, electrical safety, service contracts, warranty, and validation options.
Details procedures for transporting, storing, lifting, unpacking, and returning the SI PCF unit.
Lists standard and robotic SI PCF machine part numbers and required accessories for check.
Provides a detailed list of components included in the standard accessory kit (MP21424).
Lists optional accessories like baskets and printers, plus approved chemicals for the SI PCF.
Specifies requirements for machine position, ambient lighting, mains supply, and conductor colour coding.
Provides step-by-step instructions for connecting the SI PCF to water, drain, and electrical supplies.
Provides visual diagrams for SI PCF installation, including front, rear, and side views.
Illustrates the front view of the SI PCF, including minimum clearance requirements for installation.
Depicts the rear view of the SI PCF, showing service connections like water, drain, and printer.
Shows the right side view of the SI PCF with the lid closed, indicating clearance requirements.
Illustrates the right side view of the SI PCF with the lid open, showing clearances and connections.
Presents an alternative drain configuration for the rear view of the SI PCF.
Shows the right side view for an alternative drain connection configuration.
Instructions for connecting the thermal printer and setting up data logging to a PC via RS232.
Describes the touch screen menu system and its main functions for operating the SI PCF.
Covers powering up the unit, optional authorization codes, and setting the system time and date.
Explains how to select pre-programmed wash cycles and details standard program parameters.
Details the program parameters specifically for robotic wash cycles.
Provides essential safety precautions and guidelines for handling chemicals used with the SI PCF.
Covers chemical consumption, replacement, disposal of containers, and priming procedures.
Details basket usage, instrument selection, and crucial precautions for loading instruments.
Step-by-step guide on how to start and load a standard instrument cycle on the SI PCF.
Instructions for initiating and loading instruments for a robotic wash cycle, including manual pre-wash.
Explains the stages of an automated wash cycle (Pre-wash, Wash, Rinse, etc.) and process flow.
Details the steps and display information for the Pre-wash and Wash stages of the automated cycle.
Describes the Rinse and Final Rinse/Disinfection stages of the automated wash cycle.
Covers cooling, cycle completion, unloading procedures, and preparation of robotic instruments.
Details the water and time-saving Re-Wash cycle feature, allowing reuse of wash water.
Explains how to handle cycle errors, their causes, and how to safely abort an ongoing cycle.
Instructions on how to download cycle logs to a USB flash drive via the USB Data port.
Introduces routine maintenance procedures and important safety information for upkeep.
Details checks to be performed before every cycle, daily, and weekly for machine upkeep.
Provides guidance on daily cleaning, full decontamination, and pre-transport decontamination procedures.
Specifies the Decontamination Certificate form to be completed when returning the machine.
Lists common error codes, their messages, and possible causes and solutions for troubleshooting.
Addresses common faults not covered by error codes, such as poor load cleaning and leaks.
Provides detailed general specifications for the SI PCF, including dimensions, user interface, and baskets.
Lists the various standards and regulations that the SI PCF complies with.
Provides data and instructions regarding Electromagnetic Compatibility (EMC) testing and performance.
Details the SI PCF's electromagnetic emissions compliance and guidance for its intended environment.
Outlines the SI PCF's electromagnetic immunity test levels and compliance for various environments.
Provides recommended separation distances between the SI PCF and mobile RF communication equipment.
Details the basic warranty items, excluded items, and terms and conditions of the SI PCF product warranty.
Provides a template for recording routine servicing and maintenance of the SI PCF.
Lists operator numbers and their corresponding PIN codes for system access.
Explains the meaning of various symbols used throughout the SI PCF user manual.
General| Brand | Medisafe |
|---|---|
| Model | SI PCF |
| Category | Laboratory Equipment |
| Language | English |
To Next Page