Installation SI PCF User Manual
Ref: DOC03148 Issue 1 Friday, 06 January 2017 Page 22 of 81
Transport and Storage
The permissible environmental conditions for
transport and storage of a new or used SI PCF
must adhere to the environmental conditions for
altitude, temperature and relative humidity.
Marking
The markings on the packing crate stipulate the
machine’s storage conditions and handling
information.
Keep dry
This way up’
Environmental
This equipment can be transported and stored
safely, in the following environment:
Temperature Range:
+2°C to +60°C
Pressure range
50kPa to 106kPa
Humidity range
30% to 90% RH
(Non-condensing)
Lifting
Lifting and manoeuvring the SI PCF in its
packing crate must be done using a pallet truck
or forklift truck able to take a load in excess of
250kg.
Unpacking
Retain all packaging materials, if for any reason
the unit needs to be returned to the supplier,
then the original crate and packaging materials
should be re-used.
Carefully unpack your SI PCF by removing the
top panel first. The front panel of the packing
crate is designed to be used as a ramp to aid in
getting the machine off the crate. Once off its
base and unpacked, it can then be moved
across a level floor on its castors.
This equipment is not intended to be routinely
moved, wheels are provided only to facilitate
installation and servicing by a service engineer.
Returns
Before transporting a used SI PCF, it is vital
that all fluid is thoroughly drained from the
machine. If returning the unit to your supplier or
Medisafe UK Ltd it MUST first be fully
decontaminated before transporting.
The Decontamination Certificate must also be
completed and displayed in a prominent
position when returned with the product (see
section 3-16-4).
To Next Page