Questions? Refer to Page 10-13 For Customer Care Information.
8-43
Review/Change Setup for Date and Time
The Review/Change Setup menu allows the date and time to be
reviewed or changed. Depending on the format selected for date and
time (this function is performed in Test Setup/System Setup/Date
Format and Time Format menu), the instructions that appear on the
display will vary.
The date and time formats used on the following page to illustrate how
to review/change the date and time are as follows:
Date
–
month, day, year.
Time
–
12 hours.
If another date and/or time format is selected (other than the ones
stated above), the monitor will guide the operator or administrator
through screens that are very similar to the ones that appear on the
following pages.
To Next Page
Loading...
