Questions? Refer to Page 10-13 For Customer Care Information.
5-3
Data Review for Patient History by All Tests:
Please refer to page 5-2 of the Data Review section for the step-by-step
instructions to access the Data Review menu.
Note: If no information is stored for the desired category that was
selected, the following message will be displayed on the monitor:
“No Stored Tests”.
Note: If no tests match the criteria specified, this message will be
displayed on the monitor: “No Tests Match Request”. If the
monitor displays a message not indicated in these procedures,
please refer to section 10, Troubleshooting.
What You See
on the Display
What You Do Comments
1. Press 1 – Patient
History.
The Patient History menu
now appears.
2. Press 1 – All Tests. The monitor shows the
most recent patient test
result.
To Next Page
Loading...
