Questions? Refer to Page 10-13 For Customer Care Information.
8-47
What You See
on the Display
What You Do Comments
Change Setup for Edit Lists:
Refer to the beginning of the Change Setup section for step-by-step
instructions to access the Change Setup menu.
If the monitor displays a message not indicated in these procedures,
please refer to section 10, Troubleshooting.
1. Press 5 – Edit Lists. The display shows the
Edit Lists options.
The Operator List or the
Strip Lot List can be
edited.
2. Press 1 – Operator List. The display shows the
Operator ID options and
the number of operators
on the list. (This example
shows a list of 16).
The list can be edited by
adding, deleting or
changing entries.
NOTE:
• If there are no IDs on
the list, the display
shows List Empty. The
Delete and Change
options will not appear.
• If the list is full, the Add
option will not appear.
To Next Page
Loading...
