Questions? Refer to Page 10-13 For Customer Care Information.
8-35
What You See
on the Display
What You Do Comments
Review/Change Setup for System Setup:
Refer to the beginning of the Review or Change Setup section for the
step-by-step instructions to access the appropriate setup menu.
If the monitor displays a message not indicated in these procedures,
please refer to section 10, Troubleshooting.
1. Press 2 – System Setup. The display shows the
System Setup Language
menu.
2. The administrator will
select one of the
following:
Press 1 – Next, to
continue to System Setup
Beeper menu; skip
forward to step 5.
Press 2 – Change, to
change the language.
The display shows the
Language setup options.
3. The administrator will
select the appropriate
language.
The display returns to the
System Setup Language
menu.
4. Press 1 – Next, to go to
System Setup Beeper.
The display shows the
System Setup Beeper
menu.
5. The administrator will
select one of the
following options:
Press 1 – Next, to go to
System Setup Date
Format menu; skip
forward to step 8.
Press 2 – Change, to
change the beeper setting.
The display shows the
Beeper option.
To Next Page
Loading...
