MediSense Precision Xtra - Page 27

24
IMPORTANT:
•Use only the calibrator that is
packaged in the box of test
strips you are using.
•Do not use test strips that
have expired. Check the
expiration date on the test
strip foil packet and test strip
box. If only the year and
month are shown, the
expiration date is the last
day of the month.
1
Remove the glucose or
ß-Ketone calibrator package
from the new box of
test strips.
2
Open the calibrator
package. Find the three
raised bumps on the
calibrator package. Peel the
clear cover away from the
three raised bumps.
4. the the . it in until it stops.
Calibrating
Your Monitor
ART06986-Rev-B-MAN 8/22/05 11:02 AM Page 27