2
Wash your hands using
warm soapy water and dry
them completely.
3
Remove the test strip from
its foil packet.
4
Insert the three black lines
at the end of the test strip
into the strip port.
5
Push the test strip in until
it stops.
The monitor turns
on automatically.
These items show on the display
window, one after the other:
•Display Check – Remember to
make sure that all items in the
picture here show on the
display window. (See Chapter
1 for more information about
the Display Check.)
Monitoring
Blood ß-Ketone
46
ART06986-Rev-B-MAN 8/22/05 11:02 AM Page 49
To Next Page
Loading...
