Monitoring
Blood ß-Ketone
Status bar
Countdown
50
•You hear the beeper, if the
beeper is ON.
•The display window shows the
status bar.
•Then the display window
shows the countdown.
Note: Do not remove the
test strip from the monitor
or disturb it during
the countdown.
Important: If the countdown
does not start:
What It Means:
You might not have applied
enough blood to the test strip.
What to Do:
•Apply a second drop of blood
to the test strip. Refer to your
test strip instructions for use
for the number of seconds
you have to apply a second
drop.
•If the countdown still does
not start, or if the number of
seconds you have to apply a
second drop have passed,
discard the test strip, turn off
your monitor, and try again
with a new test strip
ART06986-Rev-B-MAN 8/22/05 11:02 AM Page 53
To Next Page
Loading...
