12
ELECTRICAL INSPECTION AND MAINTENENCE
1. Inspect all electrical bed components for damage or excessive wear (i.e.
cracked or broken housings, or worn components).
2. Check handset, power, and actuator cords for chafing, cuts or excessive
wear.
3. Make sure all plugs are fully seated and free of damage.
4. Make sure all cords are free of moving parts.
5. Check all bed functions- Head raises and lowers properly. Foot raises and
lowers properly. Bed raises and lowers properly.
ACTUATORS AND CONTROL BOX
Foot Section
Actuator
Elevation
Actuator
Control Box Head Section
Actuator
To Next Page
Loading...
Need help?
General
