6
only, install the nuts on the laminated side of the board. Attach head and foot
boards to the front face of the vertical bracket legs using provided screws.
Tighten all hardware.
Install mattress stoppers.
Your bed is ready for use. When the bed is positioned perpendicular to a wall,
spacing is automatically maintained between the wall and the bed to prevent
damage to the bed or walls during raising and lowering of the bed.
BED OPERATION
Bed Positioning - Bed functions are operated with a six button (or eight button
in case of sub-acute bed) hand held pendant control. Button functions on the
hand held pendant are clearly identified with universal icons. The hand control
is provided with an attached bracket for suspending the control from side rails or
bed ends. PRIOR TO RAISING OR LOWERING THE BED AND/OR
SIDE RAILS, CHECK TO ENSURE THAT THE CORD FOR THE
PENDANT CONTROL HAS NOT BECOME ENTANGLED IN BED
PARTS. THE CORD SHOULD BE KEPT CLEAR OF MOVING PARTS
AT ALL TIMES.
Feet Down Feet Up
Head Down Head Up
Bead Down
Bed Up
To Next Page
Loading...
Need help?
General
