6
Assembly Instructions
WARNING: Failure to follow these instructions may result in
injury.
1. Carefully remove the rollator components from the shipping carton.
The contents should contain the following:
• 1 Rollator Frame
• 6 Triangular Hand Screws
• 1 Bag with Shoulder Strap
• 1 Front Tool Bag
• 1 Mini Flashlight
• 2 Front Wheels
• 2 Rear Wheel Assemblies
• 1 Backrest with Push-Buttons
• 2 Hand Grips with Brake Assembly
(Refer to Figure 1 for Assembly Parts)
2. Examine all parts for shipping damage. DO NOT use the rollator if there is
apparent damage or if any parts (other than the bags and flashlight) are missing.
If there are missing or damaged parts, please call Medline Customer Care toll
free at 1-800-MEDLINE.
3. Check all of the wheels to see that they are in good working order and roll freely.
Remove plastic cover from the wheels before use.
4. Unfold the rollator by pushing down on the Folding Hinge (G) until the frame is in
full extension.
To Next Page
Loading...
Need help?
General
