Meec tools 006305 - Page 66

EN
66
Recycle as electrical waste.
WARNING:
Risk of kickback Be careful and
avoid kickback when sawing.
Do not saw with the tip of
the bar.
Never use the saw
with just one hand.
Always hold the saw
with both hands.
Wear ear protection, a helmet
and safety glasses or a visor.
Wear vibration damping
safety gloves.
Wear safety shoes
with non-slip soles.
The chainsaw is marked with stamped symbols
to ensure safe use and care. Pay attention to
these symbols:
Opening for lling fuel.
Opening for lling chain oil.
Move the power switch to the
0 position to immediately stop
the saw.
Pull out the choke to close it,
press in the choke to open it.
Use a screwdriver to turn the
screw to MAX to increase the
amount of chain oil, or to
MIN to reduce the amount of
chain oil.
The screw under H adjusts the
fuel mixture for higher sawing
speed.
The screw under L adjusts the
fuel mixture for lower sawing
speed.
The screw under T adjusts the
idling speed.
Shows in which direction the
chain brake is inactivated
(white arrow) and activated
(black arrow).
Shows in which direction the
chain must be tted.
Manual starting.
Guaranteed sound
power level.