20
Output power and Current :
The output power is less than 0.5W, and the output
current is limited to less than 15mA (Peak to peak)
Battery status checking :
It makes it possible to verify the battery charge
status under normal use conditions.
Audible alarm :
It warns the operator in case that there are
ab
normalities in the current circuit, which make it
difficult to obtain a reliable result.
Power supply :
By means of an internal rechargeable battery or
from a 12 V external battery.
Battery charger :
It is supplied by means of an external power supply
for 220-240 V∼
(provided with the equipment) or
from a 12 V car battery.
Operation temperature :
-10°C to 50°C
Storage temperature :
-25°C to 65°C
Humidity :
95% RH (without condensation)
Equipment weight :
Approximately 2.4 kg (without accessories)
Dimensions :
221 x 189 x 99 mm.
Included accessories :
• Four steel rods.
• Connection wire to supply the charger with a 12
external battery (the car battery).
• Battery charger power supply, 220-240 V∼ input
voltage.
• One 40 meters cable in red colour.
• Two 20 meters cable in blue and green colour.
• One 5 meters cable in black colour.
• One 5 meters cable to connect to the grounding
system to be measured.
• Canvas bag.
This User’s guide.
To Next Page
Loading...
