1
General
1.1 Introduction
Power Supply Unit B10E is used to supply voltage to
the Circuit Breaker (CB) coils and spring-charging mo-
tor during installation and/or field service.
Since the high-quality voltage available at the coil
outputs is very load-independent, the power supplied
resembles what is encountered under normal oper-
ating conditions. Circuit breaker functionality thus
remains virtually unchanged.
B10E enables you to test CB functions easily at the
specified voltage levels.
1.2 Service and support
For technical assistance please contact your local
Megger representative or direct your request to the
office in Sweden.
Contact Information
Internet: www.megger.com
E-mail: support-sweden@megger.com
Tel: +46 8 510 195 00
Checklist before calling/e-mailing
for support
▪ Read the manual
▪ Restart the instrument(-s), redo test connections and try
again
▪ Try to repeat the failing operation if possible
▪ Identify the instrument model and serial number.
Shipping
If you are going to send the instrument with parcel
service use the original transport box or one with
equivalent strength. Megger can not take responsibil-
ity for transport damages.
6 B10E ZP-BG02E BG0140ME
1 GENERAL
To Next Page
Loading...
Need help?
General