2.1 General
▪ Always follow the local safety regulations that apply to
work with high-voltage equipment.
▪ Read and comply with the following safety instructions.
Symbols on the instrument
Caution, refer to accompanying docu-
ments.
Protective conductor terminal.
WEEE, Waste Electrical and Electronic
Equipment. Please utilize your local
WEEE collection facilities in the dispo-
sition of this product and otherwise
observe all applicable requirements.
The unit can also be returned to Megger
at any time at no charge for the disposal.
2
Safety
2.2 Safety instructions
WARNING
1
Always make certain that the DC system in the
substation is disconnected before connecting
B10E.
2
Always ground the B10E.
3
Before connecting B10E, turn off its master ON/
OFF switch.
4
Only connect B10E to an outlet protected with
max 16 A overcurrent protection
5
High voltage/current on input/output terminals.
6
Do not attempt to service the instrument your-
self. Opening or removing covers may expose
you to dangerous voltage. If you attempt to
service the instrument yourself the warranty is no
longer valid.
7
Do not use any accessories that are not intended
for use together with the instrument.
8
Disconnect the instrument from the mains before
cleaning. Use a damp cloth for cleaning. Do not
use liquid cleaners or aerosol cleaners.
8 B10E ZP-BG02E BG0140ME
2 SAFETY
To Next Page
Loading...
Need help?
General