IMPORTANT
1
Always use safety connecting leads.
2
Never leave the instrument unattended while it is
turned on.
3
Use only approved mains detachable cable set
with the instrument. Main supply cables shall be
rated for the maximum current for the equip-
ment and the cable shall meet the requirements
of IEC 60227 or IEC 60245. Mains supply cables
certified or approved by a recognized testing au-
thority are regarded as meeting this requirement.
4
Unplug the instrument from the mains supply
when it is left unattended or not in use.
5
Refer all servicing to Megger authorized person-
nel.
6
If you need to return the instrument, please use
either the original crate or one of equivalent
strength
BG0140ME ZP-BG02E B10E
9
2 SAFETY
To Next Page
Loading...