13
Repair and Warranty
The instrument circuit contains static sensitive devices, and care
must be taken in handling the printed circuit board. If the protection
of an instrument has been impaired it should not be used, and be
sent for repair by suitably trained and qualified personnel. The
protection is likely to be impaired if, for example, the instrument
shows visible damage, fails to perform the intended measurements,
has been subjected to prolonged storage under unfavourable
conditions, or has been exposed to severe transport stresses.
New Instruments are Guaranteed for 1 Year from the Date of
Purchase by the User.
Note: Any unauthorized prior repair or adjustment will
automatically invalidate the Warranty.
Instrument Repair and Spare Parts
For service requirements for MEGGER® Instruments contact:
or an approved repair company.
Approved Repair Companies
A number of independent instrument repair companies have been
approved for repair work on most M E G G E R®
instruments, using genuine MEGGER® spare parts. Consult the
Appointed Distributor / Agent regarding spare parts, repair facilities
and advice on the best course of action to take.
Returning an Instrument for Repair
If returning an instrument to the manufacturer for repair, it should be
sent freight pre -paid to the appropriate address. A copy of the
Invoice and of the packing note should be sent
simultaneously by airmail to expedite clearance through Customs. A
repair estimate showing freight return and other charges will be
submitted to the sender, if required, before work on the instrument
commences.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
