Need help?Do you have a question about the Megger LTW335 and is the answer not in the manual?
General| Type | Loop Tester |
|---|---|
| Display | LCD |
| Continuity Resolution | 0.01Ω |
| Loop Test Resolution | 0.01 Ω |
| Voltage Resolution | 0.1 V |
| Supply | Battery |
| Resolution | 0.01 Ω |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Battery Type | AA |
| PSC Range | 20kA |
| Accuracy | +/-2% ±2 digits |
| Power Supply | Battery |
| Loop Test Range | 0.01Ω to 1999Ω |
| Measurement Range | 0.01Ω to 1999Ω |
Critical safety warnings, precautions, and notes for instrument use.
Overview of different loop testing techniques.
Details no-trip test modes and symbols indicating test status or noise.
Explains high current loop tests for Phase to Earth, Neutral, and Phase to Phase.
How to measure and display the Prospective Fault Current (PFC).
Instructions for storing results internally and downloading them to a PC.
Key specifications for general operation and various loop testing methods.
Details on instrument protection, warranty, and service contact procedures.
To Next Page
