49
9. Select the ‘Home’ button to return to the main Palm desktop.
Bluetooth Pairing (Symbian S60 Version 3)
1. Set the MFT Range knob to the Bluetooth SET UP position.
2. Press the Bluetooth (Lock) button on the MFT, the MFT will show ‘- - -‘ if no pairing exists or the last three digits of a paired
identity if already paired.
If these three digits are the last three digits of your Bluetooth identity code (e.g. 963) then you are already paired with it. If you don’t
recognise them or are unsure then continue with the pairing process.
3. (i) Select ‘Bluetooth’ from the main Symbian desktop and ensure it is turned on..
(ii) Select the right hand Tab to show paired devices..
(iii) Select the top left hand menu button then the ‘New Paired devices’ symbol.
Note: If there is a MFT symbol present check that it has the serial number displayed as your MFT. If this isn’t the case then delete
the MFT from the Symbian and continue with the pairing procedure.
4. Push the Bluetooth (Lock) button again to start the pairing process, the MFT will display ‘<> - - - -‘
5. Once paired select the MFT symbol on the display and select ‘OK’.
6. Enter the access and select key code ‘1234’ and select ‘OK’.
7. The MFT will display the last three digits of your Bluetooth identity code when a successful pairing has been achieved (e.g.
<>963).
8. On the Symbian device select the top left hand menu button ’Yes’ to authorise the Symbian device to make the connection
automatically.
9. Select ‘Exit’ to return to the main Symbian desktop.
To Next Page
Loading...
Need help?
General
