Typical uses for Megger PAT 32 are:
• Periodic tests of equipment used in
Factories, Offices, Local Education
Authorities, Hospitals etc.
• Routine tests before and after hiring
electrical equipment.
• Basic tests following equipment repair.
• Tests by manufacturers and distributors.
Specifications
The Megger PAT 32 may be used to test equipment
originally manufactured to a range of specifications such
as:
• IEC 335 -1 / BS3456
• BS 2769
• BS 4533
• BS415
• BS 7002
Power cord
The colour code of the cord is:
Phase Brown
Protective Earth Yellow / Green
Neutral Blue
If using a fused plug, a 3 Amp fuse to BS 1362 should be
fitted.
Note: A plug severed from the power cord should be
destroyed, as a plug with bare conductors is hazardous
in a live socket outlet.
5
To Next Page
Loading...
