Need help?Do you have a question about the Megger PAT400 Series and is the answer not in the manual?
General| Test Voltage | 250 V, 500 V |
|---|---|
| Display | LCD |
| Insulation Resistance Test Voltages | 250 V, 500 V |
| Power Socket Test | Yes |
| Measurement Types | Earth Bond, Insulation Resistance, Leakage Current, RCD, Power Socket |
| Battery Life | 1000 tests |
| Leakage Current Tests | Touch current, substitute leakage current |
| Insulation Resistance Range | 0.01 MΩ to 20 MΩ |
| Earth Continuity Range | 0.01 Ω to 2 Ω |
| Leakage Current Range | 0.1 mA to 20 mA |
| Power Supply | Battery |
Introduction to the PAT400 series testers, their components, and interface navigation.
Steps for powering up the PAT400, initial configuration, and basic operation.
Guides for connecting assets, initiating tests, monitoring progress, and handling failures.
Actions after test completion, managing failures, and understanding system warnings.
Storing, saving, editing, deleting asset data, and managing test results.
Procedures for backing up, restoring, and exporting data via USB and CSV.
Creating, configuring, editing, and allocating test groups to hotkeys.
Configuring clients, locations, company details, quick tests, and system settings.
Setting up, managing, logging into, and recovering user accounts.
Enabling and configuring reverse polarity and PE measurement options.
Detailed descriptions of various electrical tests and PAT4 model comparisons.
Device specifications, available accessories, and repair/warranty information.
To Next Page