16. Carry case
The carry case for the appliance tester has a lead storage pouch in the lid of the case when opened. This
is designed for basic lead and document storage.
Further items can be stored in the pouch. If it becomes difficult to close the case, the storage pouch can
be removed from inside the case and attached to the front using the straps on the reverse of the pouch.
These are passed through the D-loops on the outside of the case and secured to the underside of the
pouch using the Velcro fixings.
An additional storage pouch is available from Megger Limited for extended storage, such that there is a
pouch on both the inside and outside of the carry case.
To Next Page
Loading...
