SAFETY PRECAUTIONS
WARNING:
VOLTAGES GENERATED BY THIS INSTRUMENT CAN BE HAZARDOUS
This instrument has been designed for operator safety; however, no design can completely
protect against incorrect use. Electrical circuits are dangerous and can be lethal when lack
of caution and poor safety practices are used. There are several standard safety precautions
that should be taken by the operator. Where applicable, IEC safety markings have been
placed on the instrument to notify the operator to refer to the instruction manual for
instructions on safety related topics. Refer to the following table of symbols and definitions.
Symbol Description
Direct Current
Alternating Current
Both direct and alternating current
Ground terminals are connected to chassis ground.
Protective Conductor Terminal
Frame or Chassis Terminal
On (Supply)
Off (Supply)
Caution, risk of electric shock
Caution (refer to accompanying documents)
To Next Page
Loading...
